Setting the LDAP and SNMP Network Service
This function allows this equipment to access the LDAP directory service. This equipment can search for
the contacts in the LDAP server to specify the recipients of the Internet Fax, fax transmission, and Scan to
E-mail job.
If the LDAP network service is enabled, you can register the LDAP directory service, and then this
equipment can search for the contacts in the LDAP server. To add the LDAP directory service, you must
operate using Imagistics Printer Utility. For more information about registering the directory service, please
see the Network Administrator's Guide.
1
Press the [NETWORK] button in the
ADMIN menu.
- The NETWORK menu is displayed.
To display the ADMIN menu, see "1.ENTERING TO ADMIN MENU".
Page 94
2
Press the [OTHER] button.
- The OTHER screen is displayed.
3
Press the [ENABLE] button to enable the
LDAP network service, or [DISABLE]
button to disable it.
- Optionally you can enter the trap community name for the SNMP
Traps by pressing the [SNMP READ COMMUNITY] button.
When you press this button, the QWERTY Type Keyboard
screen is displayed. Enter the value using the keyboard and
digital keys, and press the [ENTER] button to set the entry.
4
Press the [ENTER] button.
- Returns you to the NETWORK menu.
4
129