Setting The "Power Save" Function - imagistics cm3520 User Manual

10.4 Specifying Default Settings (User's Choice: 1 Functions)

Setting the "Power Save" Function

This function is used to specify the length of time after the last operation until this
machine automatically enters Power Save mode, and whether or not the machine
enters Power Save mode when a job is stored in the memory or a locked job is
programmed. (The default setting is 15 min. and "Permit".)
Reference
For more details, refer to "Turning the Machine On and Off" on page 2-17.
Additional Information
Jobs stored in the memory and locked jobs are erased when the machine enters
Power Save mode or Sleep mode.
1
Press the [Utility] key.
2
Touch [User's Choice: 1].
3
Touch [2/2].
4
Touch [Power Save].
5
Press the [C] (clear) key.
The currently specified value is erased.
cm3520
10
10-11