Table of Contents
Advertisement
10
9
If horizontal lines A and B are
angled as shown at the right, touch
to specify the desired
positive adjustment for θ (between
+1 dot and +10 dots).
10
Press the [Start] key.
The adjusted test pattern is printed on 11 × 17-size paper.
11
Check the print result.
If horizontal lines A and B are aligned, continue with step 12.
If more adjustment is necessary, return to step 8 and repeat the adjustment
procedure.
12
Touch [Enter].
The Expert User Mode screen appears again.
13
Touch [Exit] in the next three screen that appear.
The Basic Screen appears again.
10-72
10.10 Specifying Expert User Mode Functions
A
B
cm3520
Advertisement
Table of Contents
