Loading Paper Into The Bypass Tray - imagistics cm3520 User Manual

2.9 Loading Paper Into the Bypass Tray

2.9 Loading Paper Into the Bypass Tray
Paper can be fed manually through the bypass tray if you wish to copy onto paper
that is not loaded into a paper drawer, or if you wish to copy onto thick paper,
postcards, envelopes, overhead projector transparencies or label sheets.
Reference
For details on specifying the paper size for the bypass tray, refer to "To specify
the size of the paper in the bypass tray" on page 3-21.
1
Open the bypass tray.
When loading large-sized
paper, open the tray
extension.
2
With the side to be printed on
facing down, insert the paper as
much as possible into the feed
slot.
3
Adjust the lateral guides to fit the
size of the paper.
Reminder!
Do not load so many pages
that the top of the stack is
higher than the
Push the lateral guides firmly up against the edges of the paper.
If the paper is curled, flatten it before loading it.
cm3520
mark.
2
Tray
extension
Lateral guide
2-35