Korg microX Operation Manual: Connecting A Computer

Synthesizer/controller.
Hide thumbs
Connecting a foot pedal
If you connect a separately sold EXP-2 foot con-
troller or XVP-10 expression/volume pedal to the
ASSIGNABLE PEDAL jack, you can use it to
apply modulation to sounds or effects, or to adjust
the overall volume.
This pedal will always function in the same way
regardless of the program, combination, or multi
set you've selected. You can assign the function in
the Global mode 0: System, Foot page.
1. Connect an separately sold XVP-10 or EXP-2 to
the ASSIGNABLE PEDAL jacks.
2. After turning the power on, use GLOBAL 0:
System, Foot page "Foot Pedal Assign" to
assign the function controlled by the foot pedal.
(☞p.89)

Connecting a computer

Connecting a computer
You can connect the microX to your computer and
use it as both an input keyboard and a MIDI
sound module.
You can also use the included editor to edit the
microX from your computer.
You can connect the microX to your computer in
either of the following ways.
• Use a USB cable
Note: Use the KORG USB-MIDI Driver if you're
connecting the microX via USB to a computer
that meets the requirements described in
"KORG USB-MIDI Driver operating
requirements," below.
• Use a commercially available MIDI interface,
and connect the microX via its MIDI connec-
tors.
Operating requirements for the
KORG USB-MIDI Driver and the edi-
tor software
Contents of the CD-ROM
microX Editor/Plug-In Editor
(for Windows XP / Mac OS X)
KORG USB-MIDI Driver
(for Windows XP / Mac OS X)
microX External Control Template
Parameter Guide (PDF)
Editor/Plug-In Editor Manual (PDF)
microX External Control Template List (PDF)
Software License Agreement (PDF)
Please note before use
• Copyright to all software included in this prod-
uct is the property of Korg Inc.
• The license agreement for this software is pro-
vided separately. You must read this license
agreement before you install this software.
Your installation of this software will be taken
to indicate your acceptance of this agreement.
KORG USB-MIDI Driver operating
requirements
Windows:
• Computer
A computer with a USB port, that satisfies the
requirements of Microsoft Windows XP
27

Advertising

   Also See for Korg microX

   Related Manuals for Korg microX

Comments to this Manuals

Symbols: 0
Latest comments: