Welcome Thank you for choosing Cisco SRP500 Series Services Ready Platforms. The SRP520-U Series are flexible devices that enable small businesses to connect to high quality data, hosted voice, and security services offered by service providers. This guide describes how to physically install the SRP and perform the initial configuration.
SRP is able to make and receive calls. Flashes green when a call is in progress on the port. DSL CD Flashes green when a DSL service is detected. Lights solid green when synchronized. (SRP526W-U/527W-U) Cisco SRP500 Services Ready Platforms Quick Start Guide (SRP520-U Models)
SRP521W-U Back Panel Line On/Off (FXO) Switch Port Port PHONE (FXS) LINE (FXO) WAN (10/100) LAN (10/100) 12VDC Phone 12 V DC (FXS) Ports power Ports Cisco SRP500 Services Ready Platforms Quick Start Guide (SRP520-U Models)
LAN connectivity. See the SRP500 Administration Guide for further information. On/Off Switch Powers the SRP on or off. 12V DC power Connect to the provided power adapter. Cisco SRP500 Services Ready Platforms Quick Start Guide (SRP520-U Models)
This will reset the device to its factory CAUTION default settings USB port Connect to a compatible USB Modem. Installing a Mobile Broadband USB Modem (Optional), page WiFi Antenna Adjustable WiFi antenna. Cisco SRP500 Services Ready Platforms Quick Start Guide (SRP520-U Models)
The SRP has an adjustable WiFi antenna located on the side panel of the unit. If used on a desktop, orient the antenna straight up. If wall mounted, orient the antenna perpendicular to the floor. Cisco SRP500 Services Ready Platforms Quick Start Guide (SRP520-U Models)
8-mm drill bit). Without proper anchoring, the strain of the network cable connections could pull the SRP from the wall. Locate the mounting screw slots on the bottom of the SRP, and then hang it on the screws. Cisco SRP500 Services Ready Platforms Quick Start Guide (SRP520-U Models)
Connect the plug adaptor provided for your region to the power supply. Only use the power adapter that was provided with the unit. Connect the power adapter to the 12V DC port on your SRP. 10 Cisco SRP500 Services Ready Platforms Quick Start Guide (SRP520-U Models)
Front Panel Lights, page 4. Verify that the POWER/SYS light is solid green. If you encounter problems, go to the Cisco Small Business Support Community website at www.cisco.com/go/smallbizsupport. For technical documentation and other links, see Where to Go From Here, page...
Provisioning settings for your SRP. For detailed configuration information, click the Help link from the configuration utility, or see the Cisco SRP500 Series Services Ready Platforms Administration Guide at: www.cisco.com/go/srp500resources. 12 Cisco SRP500 Services Ready Platforms Quick Start Guide (SRP520-U Models)
The modem is fully operational when the USB light turns solid green. To check the modem status and modify the settings for the mobile network, connection recovery, and failover settings, refer to its product documentation. Cisco SRP500 Services Ready Platforms Quick Start Guide (SRP520-U Models) 13...
Cisco Services Ready www.cisco.com/go/srp500resources Platform 500 Series for Small Business Cisco Small Business Cisco Partner Central for Small www.cisco.com/web/partners/sell/smb Business (Partner Login Required) Cisco Small Business Home www.cisco.com/smb Marketplace www.cisco.com/go/marketplace 14 Cisco SRP500 Services Ready Platforms Quick Start Guide (SRP520-U Models)
Page 16
Small Business Support, Global: www.cisco.com/go/sbsc 78-19239-03 Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/ trademarks. Third party trademarks mentioned are the property of their respective owners.
Need help?
Do you have a question about the Small Business SRP520-U and is the answer not in the manual?
Questions and answers