Installation instructions
3.6 Installation and connection of auxiliary equipment and options
•
•
The various options normally place no specific requirement on the installation.
3.6.1 Setting the tray feed (in and out)
Basic infeed settings
1.
WD-215T & WD-275T
touch
Once the machine is in place and has been adjusted horizontally and ver-
tically, the auxiliary equipment can be fitted.
The machine can be equipped with a number of options. Check what your
machine is equipped with, which depends on the model, machine type and
country.
The wheels are set in the middle position of the oval grooves.
- The basic setting for the runner is the centre position in the oval grooves.
20
Rev. 00 (202310)