Table of Contents
Advertisement
Installation instructions
The air flow can be fine-tuned by adjusting the guide plate and adjustable
deflector plate located below the machine's washing conveyor.
The spreader plate, guide plates and adjustable deflector plate should be torque-
tightened once everything has been set.
3.9 Installation and connection of auxiliary equipment and options
•
•
The various options normally place no specific requirement on the installation.
WD-59CTS & WD-66CTS
The angled side of the guide plates faces downwards and points in the
direction in which a stronger air flow is required. This provides maximum
strengthening of the air flow in the required direction
The strength of the air flow can be adjusted by turning the guide plates in
various ways. In this example, the directed air flow will not be as strong as
in the example above
Once the machine is in place and has been adjusted horizontally and
vertically, the auxiliary equipment can be fitted.
The machine can be equipped with a number of options. Check what your
machine is equipped with, which depends on the model, machine type and
country.
28
35-1-02-006_R1
35-1-02-007_R1
Rev. (202210)
Advertisement
Table of Contents
