Refitting The Starter Motor - Gilera GP 800 i.e. Service Station Manual

GP 800 i.e.
- Lubricate the inside bushing and the starter ring
gear hub surface.
- Install the start-up rim on the flywheel turning it
clockwise and inserting at the same time.

Refitting the starter motor

- Check that the O-ring is in good working order
and lubricate it.
- Insert the starter motor.
- Tighten the 2 fastening screws to the prescribed
torque.
Locking torques (N*m)
starter motor retainers 11 - 13
Engine
ENG - 45