Driving Pulley Shaft Supporting Bearing Removal; Driving Pulley Shaft Supporting Bearing Fitting - Gilera GP 800 i.e. Service Station Manual

Engine
- Refit the seeger ring.

Driving pulley shaft supporting bearing removal

- Remove the transmission cover.
- Remove the seeger ring.
- Take out the bearing using the specific tool.
Specific tooling
001467Y007 Driver for OD 54 mm bearing
001467Y006 Pliers to extract 20 mm bearings

Driving pulley shaft supporting bearing fitting

- Heat the transmission cover interior using the heat gun.
Specific tooling
020151Y Air heater
ENG - 6
GP 800 i.e.