Brake Fluid Level Check; Removal - Gilera GP 800 i.e. Service Station Manual

Braking system
Brake calliper bleed screws. 12 ÷ 16

Brake fluid level check

- Rest the vehicle onto the centre stand, with the
handlebar centred.
- Check the fluid level through the specific sight
glass.
- Top-up whenever the level is below the MIN ref-
erence «A» for the left reservoir, and reference
«B» for the right reservoir.

Removal

- Remove the two contacts from the stop light
switch.
- Drain off the braking system corresponding to the
circuit being tested.
- Remove the oil pipe coupling.
BRAK SYS - 12
GP 800 i.e.