Refitting The Starter Motor; Cylinder Assy. And Timing System - Gilera Nexus 500 Workshop Manual

Engine
- Tighten the flywheel lock nut to the prescribed
torque.
Locking torques (N*m)
Flywheel fixing nut
115 - 125
- Install the chain guide retain plate tightening the
3 screws to the prescribed torque.
N.B.
BEFORE TIGHTENING THE SCREWS, MOVE THE START-
UP RIM IN CONTACT WITH THE CRANKCASE AND CHECK
THAT IT IS FREE TO ROTATE IN ANTICLOCKWISE DIREC-
TION.
Locking torques (N*m)
Chain guide sliding block retain plate fasten-
ing screws
3 ÷ 4

Refitting the starter motor

- Check that the O-ring is in good working order
and lubricate it.
- Insert the starter motor.
- Tighten the 2 fastening screws to the prescribed
torque.
Locking torques (N*m)
Starter motor screws

Cylinder assy. and timing system

- Remove the external and internal transmission
cover.
ENG - 126
11 ÷ 13
Nexus 500