Inspecting The Valves; Inspecting The Valve Stem Guide Clearance; Inspecting The Springs And Half-Cones - Gilera GP 800 i.e. Service Station Manual

Engine
Cylinder Head

Inspecting the valves

N.B.
TO MEASURE WEAR LIMITS AND COUPLING CLEARANCES, SEE THE SPECIFICATIONS CHAP-
TER.
See also
Cylinder Head

Inspecting the valve stem guide clearance

N.B.
TO MEASURE WEAR LIMITS AND COUPLING CLEARANCES, SEE THE SPECIFICATIONS CHAP-
TER.
See also
Cylinder Head

Inspecting the springs and half-cones

- Check that the upper and lower supporting spring
washers, the cotters and the oil seal show exhibit
no signs of abnormal wear. Replace a component
when worn.
- Measure the unloaded spring length.
N.B.
TO MEASURE WEAR LIMITS AND COUPLING CLEARANCES, SEE THE SPECIFICATIONS CHAP-
TER.
See also
Cylinder Head
ENG - 60
GP 800 i.e.