Horn Control - Gilera GP 800 i.e. Service Station Manual

Electrical system
12) Check the continuity of the cable harness between fuse No. 9 and the engine stop switch (White-
Black cable). Also check continuity between the latter (positive multimeter probe, Yellow-Green cable)
and pin 27 of the control unit vehicle-side connector (negative probe, Green cable).
13) Check the contacts of the starter button, stop buttons, stand button and engine stop switch.

Horn control

KEY
14. Main fuses
15. Main relay
16. Key switch contacts
19. 1A diode
21. Auxiliary fuses
22. 12V - 14Ah battery
60. Horn button
61. Horn
WARNING
ALL CONTINUITY TESTS MUST BE CARRIED OUT WITH THE CORRESPONDING CONNECTORS
DISCONNECTED.
ELE SYS - 38
GP 800 i.e.