Characteristics
MINIMUM OIL PRESSURE SENSOR
Normally closed switch
Activation threshold: 0.3 - 0.6 bar
With the engine off: continuity between terminal
and ground
STATOR
Resistance between terminals: 0.2 ÷ 1 Ohm
Terminal insulation from ground
Frame and suspensions
Specification
Chassis
Front suspension
Front suspension travel
Oil quantity for stem
Unloaded spring length
Rear suspension
Rear suspension travel
Brakes
Specification
Front brake
Rear brake
CHAR - 12
FRAME AND SUSPENSIONS
Double cradle with tubular and steel stamped
Hydraulic telescopic fork, single plate, ø 41-mm
Single shock absorber that acts directly on the
BRAKES
Ø 300-mm double disc brake with hydraulic control
activated by the handlebar right-hand lever.
Two floating callipers, ø 28 double plunger
Ø 280-mm disc brake, with hydraulic servo oper-
ated from the handlebar with the left-hand lever.
One floating calliper with a single plunger
GP 800 i.e.
Desc./Quantity
plates
straight stems.
126 mm
295 ± 3 cm³
----- mm
fork.
135 mm
Desc./Quantity