Light Bulbs Table - Gilera GP 800 i.e. Service Station Manual

GP 800 i.e.
2) Check the working order of fuse No. 1.
3) Check contacts «A» and «B» of the key switch.
4) Check the main relay.
5) Check that the main relay and ground Brown-Black cable is earthed.
6) With the key switch set to «ON», check if there is voltage between the Orange cable of the main
relay and the ground connection.
7) If there is no voltage, check the continuity of the cable harness with the fuse box (fuse No. 1).
8) Check fuse No. 8 and the continuity of the cable harness with the main relay (Orange cable).
9) Check the continuity of the cable harness between fuse No. 8 and the stop buttons (Purple-White
cables).
10) Check that the stop buttons work properly.
11) Check the continuity of the cable harness between the stop buttons and the rear light (Grey-Green
cable).
12) Check that the Black cable of the rear light is earthed.
1
2 High-beam light bulb
3
4 Front turn indicator bulb
5
6
7 Rear turn indicator light bulb
8 License plate light bulb
9 Helmet compartment light bulb
10 Instrument panel bulb
11 Turn indicator warning light bulb
L
IGHT BULBS TABLE
Specification
Low-beam bulb
Front tail light bulb
Rear tail light bulb
Stop light bulb
Electrical system
Desc./Quantity
Type: HALOGEN (H7)
Power: 12V - 55W
Quantity: 1
Type: HALOGEN (H1)
Power: 12V - 55W
Quantity: 1
Type: ALL GLASS
Power: 12V - 5W
Quantity: 1
Type: WITH BULB
Power: 12V - 10W
Quantity: 1 RHS + 1 LHS
Type: LED
Power: -
Quantity: 1
Type: LED
Power: -
Quantity: 1
Type: WITH BULB
Power: 12V - 10W
Quantity: 1 RHS + 1 LHS
Type: ALL GLASS
Power: 12V - 5W
Quantity: 1
Type: FESTOON BULB
Power: 12V - 5W
Quantity: 1
Type: ALL GLASS
Power: 12V - 2W
Quantity: 4
Type: ALL GLASS
Power: 12V - 1.4W
ELE SYS - 45