Engine To Chassis Locking Torques; Nut Fixing Silent-Block Plate - Gilera GP 800 i.e. Service Station Manual

Engine from vehicle
C. Pin fixing nut - M14
D: Pin fixing nut - M10
E: Upper nut fixing engine support link rods - chassis
F: Lower nut fixing engine support link rods - chassis
- Follow the removal steps but in reverse order; be careful to tighten to the prescribed torques.
Name
Nut fixing silent-block plate - chassis

Nut fixing silent-block plate

Pin fixing nut - M14
Pin fixing nut - M10
Upper nut fixing engine support link rods - chassis
Lower nut fixing engine support link rods - chassis
- Restore all the retainers, check the engine oil level and top-up with the recommended oil type if nec-
essary.
- Fit the complete muffler unit.
- Fit the pinion unit, the rear fork together with the wheel and check if the chain tension is adequate.
- Fill and bleed the cooling circuit.
- Check the functioning of the accelerator and the electrical devices.
ENG VE - 16

ENGINE TO CHASSIS LOCKING TORQUES

GP 800 i.e.
Torque in Nm
22 ÷ 25
33 ÷ 41
124 ÷ 153
47 ÷ 52
33 ÷ 41
33 ÷ 41