North Direction ( Menu => Screen => North Direction); Zone Title ( Menu => Screen => Zone Title) - Honeywell HWC-S363-RV Instruction Manual

Ip speed dome camera

Table of Contents

program by moving the Joystick to the right. Press ESC to exit the program without

saving.

Press the HOME orOff button to delete programmed privacy zone.

2.3 North Direction ( MENU => Screen => North Direction)

Press and down the SHFT/PGM key and then use the Joystick (direction and zoom)

until to get the desired direction. Release the key then current pan angle will be displayed

on position item. (Or twist the zoom handle or hit the zoom button to start PTZ control for

view selection and hit the Focus button to exit from control mode.)

2.4 Zone Title ( MENU => Screen => Zone Title)

Enter a specific name in sectioned angle between Start and End.

1. Press MENU => Screen => Zone Title to display zone title menu on the monitor.

2. Select the zone number by moving the Joystick up or down. Select Start, End or

number column to be set by moving the handle to the right or left. The selected column will

be highlighted.

3. Twist the joystick handle on the No. column to enter zone title. Select alphanumeric

characters by rotating the handle. Move to the next character by moving the Joystick to

the right. To finish entering the title, move the Joystick down.

4. To adjust panning limit, press the SHFT/PGM key and hold down. Then use the

Joystick to go the desired direction. The end limit must be in an increasing direction.

(Start < End). (Or twist the zoom handle or hit the zoom button to start PTZ control for view

selection and hit the Focus button to exit from control mode.)

5. Prev Next : go to previous page or next page of the menu

6. Save And Exit the program by moving the Joystick to the right. Press ESC to exit the

program without saving.

ZONE TITLE

Title

01 WINDOW

Save And Exit

01/02

Start

End

123.4 345.6

----- ----

PTZ SPEED DOME CAMERAS

Table of Contents

Hwc-s364-rv Hwc-s374-rv