WebManager
WebManager
The WebManager is a web-browser based method of configuring/managing a Terminal Server.
To access a Terminal Server through the WebManager, open up your web browser and type in
the IP address of the Terminal Server that you want to manage/configure. A login screen will
appear.ype in the Admin password.
Using the WebManager
The Server Configuration window is displayed after you first log on. The running Terminal Server
configuration is displayed in the WebManager. You navigate through the different configuration
windows by selecting the configuration window from the drop-down options in the upper-lefthand
corner of the browser.
When you have completed all the changes to a configuration window, click the
After you make all your configuration changes, click the
changes to take effect immediately, click the
Submit
do not click the
Server reboots. After you click the
Terminal Server.
Note:
CLI
The Command Line Interface (CLI) is a command line option for Terminal Server
configuration/management and user access. See
83
for a full explanation of how to use the CLI.
38
them, and then click the
Kill Line
Save to FLASH
button, your changes will be lost the next time the Terminal
Use the WebManager's drop-down menus to navigate through the WebManager. Do not
use the browser's Back button.
Terminal Server User Guide
Save to FLASH
button. You can make changes to a line,
Reboot
button to test the changes immediately; however, if you
Reboot
button, you will need to reconnect and login to the
Chapter 6, Command Line Interface on page
Submit
button.
button. If you want your
Need help?
Do you have a question about the Terminal Server and is the answer not in the manual?