Vmodem Settings - Black Box Terminal Server User Manual

VModem Settings

When the Line Service is set to
virtual modem connection is established, data will flow in both directions in its original format.
Configure the following parameters:
Host Name
The target host name.
Port
The port number the target host is listening on for messages.
Success
String that is sent to the serial device when a connection succeeds. If no
string is entered, then the string
speed, for example
Failure
String that is sent to the serial device when a connection fails. If no string is
entered, then the string
Suppress
If set to
connected device, otherwise these indications are suppressed.
Style
One of the following:
VModem , the Terminal Server acts as a virtual modem. After a
CONNECT 9600
NO CARRIER
No , connection success/failure indication strings are sent to the
Verbose—Return codes (strings) are sent to the connected device.
Numeric—The following characters can be sent to the connected
device:
1 Successfully Connected
2 Failed to Connect
4 Error
will be sent with the connecting
CONNECT
.
will be sent.
Using the DeviceManager 69
Configuring Lines