Set Gateway; Show Gateways - Black Box Terminal Server User Manual

Set Gateway

Description Configures the gateway.
User Level Admin
Syntax
set gateway <config_gateway_host> default
set gateway <config_gateway_host> host <destination_ip>
set gateway <config_gateway_host>
network <dest_ipv4_addr>|<dest_ipv6_address>
[<subnet_bits_0-32>|<subnet_bits_0-128>]
Options <config_gateway_host>
You can view the configured gateways that can be deleted by typing
delete gateway ?
default|host|network
Specify the type of gateway:
Default—A gateway which provides general access beyond your local network.
Host—A gateway reserved for accessing a specific host external to your local
network.
Network—A gateway reserved for accessing a specific network external to
your local network.
<dest_ip_addr>
When the gateway is a
of the target host machine/network.
<subnet_bits>
When the gateway is a
that network. If the IP address is IPv4, then the Subnet/Prefix Bits range is 0-32. If
the IP address is IPv6, then the Subnet/Prefix Bits range is 0-128.

Show Gateways

Description Shows configured gateways.
User Level Normal, Admin
Syntax
show gateways
.
or gateway, you must specify the IP address
Host Network
gateway, you must specify the subnet/prefix bits for
Network
Network Commands
Command Line Interface 111