Configuring The Hardware; Configuring Lines - Black Box Terminal Server User Manual

Configuring Lines

Configuring the Hardware

You need to configure the ethernet interface that you are using to connect the Terminal Server to
the LAN.
Select the appropriate option:
Ethernet1 Speed
and Duplex
Configuring Lines
When you configure the Terminal Server
accessed. You can always make changes to
select
Configuration to Unit
effect.
Configure the appropriate parameters:
Line Name
Service
DS Port
62
Define the ethernet connection speed at one of the following:
—automatically detects the ethernet interface speed and duplex
auto
10 Mbps Half Duplex
10 Mbps Full Duplex
100 Mbps Half Duplex
100 Mbps Full Duplex
, to test your changes. However, you still must select
Tools Kill Line
and Tools
Provide a name for the line so it can be easily identified.
Defines the
See Service Settings on page 66
each
Line Service
The Terminal Server port number.
Terminal Server User Guide
, you are specifying how the port will be used and
Line
parameters, click the
Line
, Reboot Server to make your changes permanent and take
, which determines how the line will be used.
Line Service
for more information about configuring
.
button, and then
Apply
,
Tools Download