Set User Session; Show Default User; Show User - Black Box Terminal Server User Manual

Set User Session

Description Configures a user's session settings. See
options descriptions.
User Level Admin
Syntax
set user .|<username> session 1|2|3|4|* [auto on|off]
[type off|telnet]
set user .|<username> session 1|2|3|4|* telnet-options
[host <config_host>] [port <TCP_port>]
[termtype <terminal_name>] [line-mode on|off]
[map-cr-crlf on|off] [local-echo on|off]
[echo <00-7f>] [eof <00-7f>] [erase <00-7f>] [intr <00-7f>]
[quit <00-7f>]

Show Default User

Description Shows the Default User's settings.
User Level Admin
Syntax
show default user

Show User

Description Shows user configuration settings.
User Level Admin
Syntax
show user <configured_user>|.
Options <configured_user>
Show the settings for the specified user.
.
Show the settings for the current user.
User Commands
Set User Session on page 90
Command Line Interface 97
for the