Line Commands; Set Line - Black Box Terminal Server User Manual

Line Commands

Line Commands
Line Commands

Set Line

Description Configures line parameters.
User Level Normal, Admin
Syntax
Admin
Options
98
set line [data-bits 5|6|7|8] [dial none|in|out|both]
[idle-timer <0-4294967>] [line-name <name>]
[modem-name <config_modem>] [pages 1|2|3|4|5|6|7]
[parity none|even|odd|mark|space] [phone-number <phone_number>]
[rev-sess-security on|off] [sess-timer <0-4294967>]
[stop-bits 1|2|1.5] [termtype wyse60|vt100|ansi|dumb|tvi925|
ibm3151te|vt320|hp700|term1|term2|term3]
set line ... [break on|off] [flowin on|off] [flowout on|off]
[hotkey-prefix <00-7f>] [initial cli|menu] [keepalive on|off]
[lock on|off] [motd on|off] [reset on|off]
[dial-timeout <number>] [dial-retries <number>]
[single-character on|off] [user <name>] [nouser]
data-bits
Specifies the number of bits in a byte. The default is
dial
Determines how a modem will work on the line. If your user is remote and will be
dialing in via modem or ISDN TA, set this parameter to
being used as a router, set this parameter to either
which end of the link your Terminal Server is situated and how you want to initiate
the communication.
idle-timer
Enter a time period, in seconds, for which the
close a connection because of inactivity. When the
Server will end the connection. The maximum value is 4294967 seconds (about 49
days). The default value of
connection is permanently open.
line-name
Provide a name for the line so it can be easily identified.
modem-name
The name of the predefined modem that is used on this line.
pages
For line service, this is the number of video pages the terminal supports.
DSLogin
Valid values are 1-7. The default is
parity
Specifies if you are using
parity type, you can specify
phone-number
The phone number to use when
rev-sess-security
Enables/disables login/password authentication, locally or externally, on reverse
Telnet connections. The default is
Terminal Server User Guide
Idle Timer
(zero) means the
0 Idle Timer
pages.
5
, , or on the line. If you want to force a
Even Odd No parity
for 1or for 0.
Mark Space
is set to .
Dial Out
.
Off
.
8
; if the Terminal Server is
In
, , or , depending on
In Out Both
will run. Use this timer to
expires, the Terminal
Idle Timer
will not expire, so the