Black Box Terminal Server User Manual page 100

Line Commands
100
user
For DSLogin line service, makes this a line that is dedicated to the specified user.
Only this user will be able to log in on this line and they won't need to enter their
login name - just their password.
nouser
Blanks out the User parameter, in case you want to change a dedicated user line to
an undedicated line.
reset
Resets the terminal type connected to the line when a user logs out.
dial-timeout
The number of seconds the Terminal Server will wait to establish a connection to a
remote modem. The default value is
dial-retries
The number of times the Terminal Server will attempt to establish a connection with
a remote modem. The default value is
single-character
When enabled, causes the Terminal Server to process every character as it comes
in, as opposed to buffering the characters before processing; this provides better
latency at the expense of efficiency.
stop-bits
Specifies the number of stop bits that follow a byte.
term-type
Specifies the type of terminal connected to the line:
Dumb
WYSE60
VT100
ANSI
TVI925
IBM3151TE
VT320 (specifically supporting VT320-7)
HP700 (specifically supporting HP700/44)
Term1, Term2, Term3 (user defined terminals)
Terminal Server User Guide
45 seconds.
2 .