Black Box Terminal Server User Manual page 27

6. Any Terminal Server that does not have an IP address will be displayed as
with the and
Model MAC Address
Server that you want to assign an IP address to and click the
Note: If your Terminal Server is displayed with an IP address at this point, you are running
a DHCP/BOOTP server on your network and the Terminal Server has obtained an IP
address already. If you want to permanently assign an IP address, continue following
the directions, if the DHCP/BOOTP assigned IP address is sufficient, you are now
ready to configure the Terminal Server.
7. Type in the IP address that you want to assign to this Terminal Server and click the
IP button.
Note: This is just a temporary IP address that you can use to open a session to the
Terminal Server for configuration.
8. You are now ready to configure the Terminal Server. Double-click the Terminal Server you
just assigned the temporary IP address to, to open a configuration session. Type
(the factory default Admin user password) in the Login window and click
9. Expand the Server Configuration
permanent IP address in the
Server window.
Note: If your network runs a DHCP server and you don't want the Terminal Server to
obtain its
IP Address
server and you want to assign a permanent
in this window.
Service
10. Click the button when you're done with the Server window. To permanently assign the
Apply
IP address, you need to download the new configuration file and then reboot the Terminal
Server.
11. Download the configuration file to the Terminal Server by selecting
Configuration to Unit
12. Reboot the Terminal Server by selecting
For more information on configuring the Terminal Server using DeviceManager, see
Using the DeviceManager on page
to identify the Terminal Server. Highlight the Terminal
folder and select
Internet Address
from the DHCP server (or if you're not sure if there is a DHCP
.
Tools
55.
Setting an Initial IP Address
Assign IP
Server . You can choose to enter a
field and the
Subnet/Prefix Bits
), disable the
IP Address
Tools
, Reboot Server .
,
Not Configured
button.
Assign
superuser
OK .
field of the
DHCP/BOOTP
, Download
Chapter 5,
Installation 27