ZiLOG System 8000 Hardware Reference Manual page 285

HRM
Zilog
HRM
CMP ERR IN BACKGR: SRC<ss>soff=sd DST<ds)doff=dd
ORIG BUFS: WR<ws>woff RD<rd>roff L=llll DISK=u,cccc,hh,3s
A mismatch was found in the background (all memory
locations outside the write and read buffers are
the background). The data given in this message
ls the same as that described for the compare
errors within the read and write buffers (see
above). Only test 2 does a background check after
a write and read.
LAP SUMMARY::
At the end of each complete lap of SMDTEST, a table of
command and error statistics is displayed. This lap
summary table is described in the INTRODUCTION TO SMD
DIAGNOSTICS.
A-54
Zilog
A-54