ZiLOG System 8000 Hardware Reference Manual page 226

HRM
GOTO
Zilog
HRM
The GOTO statement is useful for setting up test loops. It
causes the execution of the test list to jump to a specified
line. A loop count of 0 to
9999
is specified. When the
specified loop count is reached, control will fall to the
next statement in the test list. When special value 0 is
specified, GOTO will always be executed.
PAUSE
This statement· causes the PAUSE menu to be displayed. SADIE
programs are not disturbed; they are only temporarily halted
to allow for optional action. The optional available com-
mands are listed in the following PAUSE menu:
***** PAUSE *****
L
Display current test LIST
D DISPLAY error log
E
Display detailed ERROR log
A Display cumumative log of ALL tests in list
M
MONITOR function
S
SKIP to next line in test list
<CR> RESUME current test
Return to COMMAND LEVEL
All the commands operate tbe same way, except the
SKIP command, S, which causes the line of the
test list following the PAUSE line to be skipped,
rather than the PAUSE line itself.
PRINT OPTIONS
There are five print option statements that determine wheth-
er test output will be printed as well as being displayed.
Normally, test error messages are displayed but not printed.
5-63
Zilog
5-63