ZiLOG System 8000 Hardware Reference Manual page 218

HRM
CRT Display Contents:
Optional Commands:
Zilog HRM
*****
SET PARAMETERS
*****
Optional available commands in this
mode are:
Command
Description
A number
#
representing
the value of the para-
meter.
Return to CHOOSE A TEST
or CONTROL LINE.
5.1502. Command Level R: REPEAT previously loaded single
test:
General Description:
CRT Display Contents:
Optional Commands:
A previously chosen single test is
run. Parameters, repetition
counts, and options can be reset
before the test is re-executed.
**
RESET TEST LINE (OPTIONAL)
**
Optional available keyboard com-
mands in this mode are the same
a3
T (choose and run a single TEST).
5.15.3. Command LevE~l L: Run current test LIST:
General Description: Current
chosen
is
run~
test list (previously'
or selected at edit level)
First, the list is examined and, if
it contains tests that overwrite
the disk, a warning appears. It
must be verified that this
overwriting is permissible before
execution of the list begins. If a
test on the list does not appear in
the catalog, this information is
displayed and execution continues.
If execution of the list will cause
lines to be printed, and no prior
lists have opened the lineprinter
file, a menu of lineprinter inter-
faces appears. If a test writes to
tape, execution of the list pauses
5-55
Zilog
5-55