Mmb Firmware Upgrade Via Tftp - Fujitsu PRIMERGY ServerView BX900 User Manual

MMB firmware upgrade via TFTP

4.4 MMB firmware upgrade via TFTP
1. Open the MMB WebUI and navigate to Operation → Firmware Update.
Figure 39: Firmware Update Settings (TFTP/HTTP) frame on the Firmware Update page
2. In the Firmware Update Settings (TFTP/HTTP) frame, select the TFTP radio button.
3. Specify the server in the Server Adress/Name text field as IP address (IPv4 or IPv6) or DNS name.
4. Enter the firmware filename in the Update File text field as pathname.
5. Select the Firmware Update Mode with one of the three radio buttons:
– Master MMB Update (master only)
– Slave MMB Update (slave only)
– Dual MMB Update (both MMBs)
6. Press the Start Update button.
The MMB copies the file, checks format and integrity and starts the flash procedure if no error occurred. In the
case of errors the user will be informed by a status message.
After reboot of the MMB Management Blade-<n> TFTP upgrade success (where <n> = 1 or 2) can be read as entry
in the MMB event log.
50
Web User Interface
ServerView BX900 Management Blade