Error Handling - Fujitsu PRIMERGY ServerView BX900 User Manual

The Start Page
4. Main frame (4)
The main frame supplies information about the BX900 S1 system unit. It contains information about the
option/component which was selected via one of the two views or the navigation menu.
The individual server blade status is displayed in the Server Blade Status section using the same icons as for the
overall status of the blade server system, but two additional icons are used:
⏐
The icon on the left (amber) indicates that the server blade is operating in firmware flash phase or
maintenance phase.
I
In this phase other functions triggered by the MMB can not be executed and should not be
selected by the user to avoid problems.
The icon on the right (blue) indicates that the server blade is operating in inventory boot phase or initial
boot phase.
Both icons are accompanied by extended Status information, e. g. Polling, Examine, Check, Executing,
Running, Processing, Flash in Progress.
5. Bottom frame (5)
The bottom frame only contains a copyright notice at the bottom left.

Error handling

Errors and warnings are displayed simultaneously in the status frame, the navigation frame and the main frame.
The example below shows a start page with the complete error display in all three frames:
Figure 33: Start page with error display
46
Web User Interface
ServerView BX900 Management Blade