Fujitsu PRIMERGY ServerView BX900 User Manual page 62

Control via Tabs
Scheduled
An alternative to the modes which can be selected above it which permanently determine the mode for the
server blades. Enables the time-of-day-dependent mode settings which can be specified jointly for all server
blades in the Scheduled Server Blade Consumption box.
Adaptive Mode
The settings in this box are enabled when Adaptive mode is selected in the System Power Consumption Modes box.
Re-Evaluation Period (1 - 60)
Specifies the re-evaluation period (in minutes) for the power consumption mode Adaptive.
Re-Evaluation Policy
SelectConsumption Demand, when the power budget available for server blades is to be distributed according
to their power consumption in the past. Select Server Blade Priority, when the power budget available for
server blades is to be distributed according to their priority. The priority is determined by the Adaptive
Budgeting Priority Table box (box at the bottom).
Server Controlled Consumption Mode Table
The settings in this box are enabled when Controlled mode is selected in the System Power Consumption Modes box.
This box is used to select the server blades individually and to leave consumption control to the iRMC of the server
blade (with the mode and consumption limit specified there) or to define a consumption limit for the selected server
blade.
On the right of the box the input power values for each server blade are displayed in the form of a colored bar chart.
The evaluation period can be selected for the diagram values Avg. and Peak (Minimum: 1 Hour; Maximum: 1 Year).
Figure 51: Power Management – Consumption tab (2/2)
62
Power Management
ServerView BX900 Management Blade