Set System Default - Fujitsu PRIMERGY ServerView BX900 User Manual

Management Agent
3.3.9.3 Server Blade Power On/Off Event Log Enable
This option is used to specify, whether power on/off events for the server blades should be listed in the event log.
3.3.9.4 Management Blade Wrap Around Event Log Enable
This option is used to specify whether the wrap-around functionality for the event log should be used or not.
Parameter
enable
disable
3.3.9.5 Backup All Event Log to USB Device
This option is used to save the MMB's event log to a USB medium.
Parameter
USB device selection
Filename (empty default name) Name of the file which will be written to USB – if nothing is entered, a default
Enable
3.3.9.6 Management Blade Wrap Around Event Log Enable
Specifies whether the wrap-around functionality of the event log should be used or not.
Enabled (= 1): When the event log repository is full, new event log entries replace the old ones beginning with the
first event log entry.
Disabled (= 0): When the event log repository is full, no event log entries are written any longer.
3.3.9.7 Backup All Event Log to USB Device
BX400 only. Copies the log message to USB device. 0 = disabled.

3.3.10 Set System Default

The Set System Default option is used to restore the default values.
The menu for this option looks like this:
30
Description
When the event log repository is full, new event log entries replace the old ones
beginning with the first event log entry.
When the event log repository is full, no event log entries are written any longer.
Description
Selects the USB medium (all the devices connected to the MMB are displayed
here).
name is used.
Starts the backup to the USB medium.
ServerView BX900 Management Blade
Telnet Interface