Fujitsu PRIMERGY ServerView BX900 User Manual page 45

Web User Interface
3. Navigation frame (3)
The navigation frame consists of three different views:
– Front View
Displays the BX900 S1 system unit with the existing blades (server blades and storage blades). When you
point the cursor to a blade, a tooltip with the relevant name is displayed. The individual blades are clickable,
i.e. after they have been clicked on, the associated information is displayed in the main frame.
I
When the power supply is switched off (via Information / Operation → Power Management → Power
Switch → Actual System Power Status), no blades are displayed, i.e. the unit is totally black. This power-
off status is also indicated by the LED at the bottom right glowing orange instead of green.
– Rear View
Displays the BX900 S1 components at the rear (connection blades, management blades, power supply
units and fan units). When you point the cursor to a component, a tooltip with the relevant name is displayed
(see the picture below). The individual components are clickable, i.e. after they have been clicked on, the
associated information is displayed in the main frame.
Figure 32: Front and rear views of a fully-equipped BX900 S1 system unit with tooltip information
– Tree View
The tree view contains various menu items which can be used to influence the system properties and the
configuration. The individual items are clickable, i.e. after they have been clicked on, the associated infor-
mation is displayed in the main frame.
I
Hardware components which are not integrated into the BX900 S1 system unit are not displayed in the
navigation frame, either.
Each of the three views of the navigation tree is collapsible (
ServerView BX900 Management Blade
or ).
The Start Page
45