Tftp Update - Fujitsu PRIMERGY ServerView BX900 User Manual

Telnet Interface
Figure 24: Console Redirection menu
There is a sub-option of console redirection for server blades and one for connection blades. Furthermore, a return
hotkey can be configured:
Sub-option
Console Redirect Connection Blade
Set Return Hotkey, Ctrl+(a character) This option is used to configure a return hotkey.
Set Console Redirection Timeout
3.6

TFTP Update

The TFTP Update option is used to perform an update of the management blade firmware.
I
For further information on updating BX components please refer to the Operating Manual of your BX system.
The menu for this option looks like this:
Figure 25: TFTP Update menu
ServerView BX900 Management Blade
Description
This option is used to configure a connection blade for console
redirection.
To do this, a character from A-Z is chosen, excluding M. The hotkey to
exit console redirection and return to the previous mode is then Ctrl + the
character that has been set here, e.g. Ctrl + R.
The default character used for the return hotkey is Q.
An active connection is automatically disconnected after n seconds.
TFTP Update
37