Replacing The Tail Light Bracket (Conventional Lighting System) - Invacare Bora XTR Series Service Manual

SERVICE MANUAL

7.11.5 Replacing the tail light bracket (conventional lighting system)

Requirements:
· 5 mm Allen key
Uninstalling the tail light bracket:
·
Remove the complete tail light, as described in chapter 7.11.4.
·
Loosen the two Allen screws (4) with a 5 mm Allen key and remove these including the
washers (3) and self-locking nuts (2) from the battery support.
·
Replace the lamp bracket (1).
Installing the headlight bracket:
·
Slide the lamp bracket (1) between the frame and battery support.
·
Assemble all parts again in reverse order.
·
Check all vehicle functions.
80
® ®
Invacare - Bora /Spectra
®
XTR Series