R-Net Electronics Module; Shark Electronics Module; Shark With 4-Pole Dci; Shark With Dci 12-Pole - Invacare Bora XTR Series Service Manual

SERVICE MANUAL
4.2.5

R-Net electronics module

Connections
1) Bus
2) Lock (INHIBIT 2)
3) Actuator 1
4) Actuator 2
5) On-board battery charger
6) Motor M1
7) Battery 24V
8) Motor M2
4.2.6

Shark electronics module

4.2.6.1

Shark with 4-pole DCI

BUS C ABLE
Connections
1) Joystick box
2) DCI for actuators (4-pole)
3) Right-hand motor M1
4) Battery 24V
5) Left-hand motor M2
4.2.6.2

Shark with DCI 12-pole

Connections
1) Cable to remote
2) DCI for actuators/lighting (12-pole)
3) Right-hand motor M1
4) Battery 24V
5) Left-hand motor M2
4.2.7

ACT actuator module

A range of adjusting motors, also known as actuators, can be fitted to the mobility device. These
actuators are either connected directly to the electronics module or to a separate actuator module.
The actuator module is connected with the electronics module via a bus cable.
24
® ®
Invacare - Bora /Spectra
®
XTR Series