Replacing Headlamps Completely (Led Lighting System Starting 03/2012) - Invacare STORM4MAX Service Manual

®
Invacare - STORM
8.7.3

Replacing headlamps completely (LED lighting system starting 03/2012)

Requirements:
· 4 mm Allen wrench
· Side cutting pliers
· Cable ties
Uninstalling headlights:
·
Remove the rear and the middle covers, as described in chapter 8.1.1 and 8.1.2.
·
Take exact note of the positions of all cables and the sockets that they are connected to. Mark
the connectors and sockets or take a photograph with a digital camera.
·
Disconnect the cable of the affected headlight from the lighting circuit board (2).
·
Open the cable clamps (1), remove all cable ties and pull the cable out of the wheelchair.
·
Loosen the hexagon socket head screw (1) with a 4 mm Allen wrench and remove the
headlight from the bracket.
·
Replace the headlight.
4
MAX SERVICE MANUAL
65