Replacing The Motor / Gearbox Coupling (Ssd Motor) - Invacare Bora XTR Series Service Manual

® ®
Invacare - Bora /Spectra
7.2.7

Replacing the motor / gearbox coupling (SSD motor)

CAUTION: Danger of crushing!
The motor / gearbox unit is very heavy. Danger of injury to the hands!
· Pay attention to the heavy weight.
Requirements:
· 10 mm socket wrench
Uninstalling the motor / gearbox coupling:
· Uninstall the motor / gearbox unit, as described in chapter 7.2.5.
· Use the 10 mm socket wrench to loosen and remove the self-securing nut (4).
· Remove the carriage bolt, which secures the sealing ring (2).
· Carefully bend the sealing ring apart and remove it.
WARNING!
Danger of damage to the wheelchair if the coupling is not serviced correctly.
· Be careful not to damage the coupling mechanism during maintenance work.
· Carefully pull the motor (3) and the gearbox (1) apart.
· Remove the component parts of the coupling.
· If necessary replace the coupling.
®
XTR Series SERVICE MANUAL
47