Invacare Bora XTR Series Service Manual page 39

Hide thumbs Also See for Bora XTR Series:
Table of Contents

Advertisement

®
®
Invacare
- Bora
/Spectra
Note
When disassembling, take care of small parts such as screws and washers. Put all small parts
down so that they can be reassembled in the right sequence.
· Remove legrests.
· Release seat (1) and tilt forwards.
· Disconnect the remote bus cable from the
electronics module or ACT.
· Lift the seat out of the front anchorage and
remove it. The seat has a heavy weight. Use
proper lifting techniques.
· Remove both battery cases as described in
Chapter 7.7.1.
· Disconnect the motor plug from the motor to
be replaced from the electronics module.
· The motor cable is secured inside the frames
with cable ties. Remove the cable ties with
the oblique pliers.
· Place the vehicle upside down so that the
wheels are facing upwards. The vehicle has a
heavy weight. Use proper lifting techniques.
· Remove the wheel as described in Chapter
7.15.
®
XTR Series
SERVICE MANUAL
39

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spectra xtr series

Table of Contents