Replacing The G-Trac Sensor - Invacare Bora XTR Series Service Manual

SERVICE MANUAL
7.4

Replacing the G-Trac sensor

Requirements:
· 5 mm Allen key
· 10 mm socket wrench
· Switch the electronics OFF.
· Remove the legrests.
· Release the seat (1) and tilt forward.
· Disconnect the remote bus cable from the
electronics module or ACT.
· Lift the seat up out of its forward mounting
and remove completely. The seat has a
heavy weight. Use proper lifting techniques.
· Remove the battery boxes, as described in
chapter 7.7.1.
· Disconnect the cable of the G-Trac sensor
from the electronics module.
· Loosen and remove the nuts (3).
· Remove the G-Trac sensor holder (1)
together with the G-Trac sensor (2).
· Loosen and remove the self-locking nut (4)
and Allen screw (3), including the washers.
· Remove the G-Trac sensor (2) from the
G-Trac sensor holder (1).
· Replace the G-Trac sensor.
56
® ®
Invacare - Bora /Spectra
®
XTR Series