Replacing The Angle Sensor - Invacare Bora XTR Series Service Manual

® ®
Invacare - Bora /Spectra

7.19.4 Replacing the angle sensor

Voraussetzungen:
· 5 mm Allen wrench
· PH1 Phillips screwdriver
Dismantling the angle sensor:
·
Remove the plug (3) from the sensor (1).
·
Open the cover of the sensor box by loosening and removing both Phillips screws (4).
·
Loosen the two Allen screws (5) and remove the sensor (1) from mounting plate (2).
·
Replace the angle sensor.
Refitting the angle sensor:
· Assemble the parts in the reverse order
®
XTR Series SERVICE MANUAL
107