Repairing A Flat Tyre (Wheel Size 280/250-4) - Invacare Bora XTR Series Service Manual

® ®
Invacare - Bora /Spectra

7.14.2 Repairing a flat tyre (wheel size 280/250-4)

Requirements:
· Allen key 6m
· jaw spanner 13 mm
· 2 x small ring spanners or flat screwdrivers (for pulling off tyres)
· Repair kit for tyre repair or a new inner tube.
· Talcum powder
Removing the wheel:
· Block up the vehicle (place wooden blocks under
frame).
· Undo the bolt (1) and remove it using the Allen key
on one side and the jaw spanner on the other (as a
counter).
· Pull the wheel out of the fork.
Note
Re-assembly is done in reverse order. Ensure that the tyre is replaced on the same side and in
the same travel direction as it was previously mounted.
®
XTR Series SERVICE MANUAL
89