Changing The Colour Mode - Sharp MX-M502N Operation Manual

CHANGING THE COLOUR MODE

This procedure is used to change the colour mode used to scan the original when the [START] key is pressed.
This function cannot be used in Internet fax mode.
Mode
Full Colour
Greyscale
Mono2
Select the mode and display the colour mode settings screen.
(1) Touch the tab of the mode that you wish to use.
1
(2) Touch the [Colour Mode] key.
☞
IMAGE SETTINGS
Image will be sent in [Mono2]
if Fax or I-Fax destination is included.
2
When a broadcast transmission is performed using mixed send modes, the image is sent in Mono2.
Scan/Colour Mode
3
• System Settings (Administrator): Default Colour Mode Settings
The default colour mode can be changed.
• System Settings (Administrator): Disable Change of B/W Setting in Auto Mode
This prohibits selection of the black and white original scanning setting when [Auto] is selected for the colour mode.
The original is scanned in full colour. This mode is best for full colour originals such as catalogues.
The colours in the original are scanned in black and white as shades of grey (greyscale).
Colours in the original are scanned as black or white. This mode is best for text-only originals.
(page 5-53)
OK
OK
Full Colour
Greyscale
Mono2
(1) (2)
Scanning method
Read the displayed message and touch
the [OK] key.
A message does not appear in USB memory mode. Go to the
next step.
Select the colour mode.
(1) Touch the key of the desired colour mode.
(2) Touch the [OK] key.
5-68
SCANNER/INTERNET FAX
Contents