Ip Alias Screen - ZyXEL Communications WAP5605 User Manual

Chapter 10 LAN
Table 37 Network > LAN > IP
LABEL
Apply
Reset

10.5 IP Alias Screen

Use this screen to have the WAP5605 apply IP alias to create LAN subnets. Click LAN > IP Alias.
Figure 56 Network > LAN > IP Alias
The following table describes the labels in this screen.
Table 38 Network > LAN > IP Alias
LABEL
IP Alias
IP Address
IP Subnet Mask
Apply
Reset
92
DESCRIPTION
Click Apply to save your changes back to the WAP5605.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
Check this to enable IP alias.
Type the IP alias address of your WAP5605 in dotted decimal notation.
The subnet mask specifies the network number portion of an IP address.
Click Apply to save your changes back to the WAP5605.
Click Reset to begin configuring this screen afresh.
WAP5605 User's Guide