ZyXEL Communications WAP5605 User Manual page 36

Chapter 4 Access Point Mode
Table 9 Navigation Panel: Access Point Mode
LINK
WLAN Station
Status
CONFIGURATION
Network
Wireless LAN
LAN
MAINTENANCE
General
Password
Time
Firmware
Upgrade
Backup/
Restore
Reset/
Restart
36
TAB FUNCTION
Use this screen to view the wireless stations that are currently associated
to the WAP5605.
General Use this screen to configure general wireless LAN settings.
Security Use this screen to configure wireless security settings.
MAC Filter Use the MAC filter screen to configure the WAP5605 to block access to
devices or block the devices from accessing the WAP5605.
Advanced This screen allows you to configure advanced wireless settings.
QoS Use this screen to configure Wi-Fi Multimedia Quality of Service (WMM
QoS). WMM QoS allows you to prioritize wireless traffic according to the
delivery requirements of individual services.
WPS Use this screen to configure WPS.
WPS Station Use this screen to add a wireless station using WPS.
Scheduling Use this screen to schedule the times the Wireless LAN is enabled.
IP Use this screen to configure LAN IP address and subnet mask.
IP Alias Use this screen to have the WAP5605 apply IP alias to create LAN subnets.
Use this screen to view and change administrative settings such as system
and domain names.
Password Use this screen to change the password of your WAP5605.
Setup
Time Setting Use this screen to change your WAP5605's time and date.
Use this screen to upload firmware to your WAP5605.
Use this screen to backup and restore the configuration or reset the factory
defaults to your WAP5605.
Restart This screen allows you to reboot the WAP5605 without turning the power
off.
WAP5605 User's Guide