Wep Encryption - ZyXEL Communications WAP5605 User Manual

Chapter 9 Wireless LAN

9.5.2 WEP Encryption

WEP encryption scrambles the data transmitted between the wireless stations and the access points
to keep network communications private. It encrypts unicast and multicast communications in a
network. Both the wireless stations and the access points must use the same WEP key.
Your WAP5605 allows you to configure up to four 64-bit or 128-bit WEP keys but only one key can
be enabled at any one time.
Select Static WEP from the Security Mode list.
Figure 45 Network > Wireless LAN > Security: Static WEP
The following table describes the wireless LAN security labels in this screen.
Table 29 Network > Wireless LAN > Security: Static WEP
LABEL
SSID
Security Mode
PassPhrase
WEP
Encryption
80
DESCRIPTION
Select the SSID for which you want to configure the security.
Select Static WEP to enable data encryption.
Enter a Passphrase (up to 26 printable characters) and click Generate.
A passphrase functions like a password. In WEP security mode, it is further converted by the
WAP5605 into a complicated string that is referred to as the "key". This key is requested
from all devices wishing to connect to a wireless network.
Select 64-bits or 128-bits.
This dictates the length of the security key that the network is going to use.
WAP5605 User's Guide