Wps Screen - ZyXEL Communications WAP5605 User Manual

The following table describes the labels in this screen.
Table 33 Network > Wireless LAN > QoS
LABEL
Enable WMM QoS
Apply
Cancel

9.9 WPS Screen

Use this screen to enable/disable WPS, view or generate a new PIN number and check current WPS
status. To open this screen, click Network > Wireless LAN > WPS tab.
Note: With WPS, wireless clients can only connect to the wireless network using the first
SSID on the WAP5605.
Figure 50 Network > Wireless LAN > WPS
The following table describes the labels in this screen.
Table 34 Network > Wireless LAN > WPS
LABEL
WPS Setup
Enable WPS
PIN Number
Status
WAP5605 User's Guide
DESCRIPTION
Check this to have the WAP5605 automatically give a service a priority level according
to the ToS value in the IP header of packets it sends. WMM QoS (Wifi MultiMedia
Quality of Service) gives high priority to voice and video, which makes them run more
smoothly.
Click Apply to save your changes to the WAP5605.
Click Cancel to reload the previous configuration for this screen.
DESCRIPTION
Select this to enable the WPS feature.
This displays a PIN number last time system generated. Click Generate to generate a
new PIN number.
Chapter 9 Wireless LAN
85