Navigation Panel; Network Map - ZyXEL Communications WAP5605 User Manual

3.4 Navigation Panel

Use this navigation panel to opt out of the Easy mode.
Figure 6 Control Panel
The following table describes the labels in this screen.
Table 2 Control Panel
ITEM
Home
Expert Mode
Logout

3.5 Network Map

Note: The Network MAP is viewable by Windows XP (need to install patch), Windows Vista
and Windows 7 users only. For Windows XP (Service Pack 2) users, you can see the
network devices connected to the WAP5605 by downloading the LLTD (Link Layer
Topology Discovery) patch from the Microsoft Website.
Note: In Windows Vista or Windows 7, you should set your network location to "Home
network" in the Control Panel > Network and Internet > Network and Sharing
Center screen.
Figure 7 Set Network Location to Home Network in Windows Vista or 7
WAP5605 User's Guide
DESCRIPTION
Click this to go to the Login page.
Click this to change to Expert mode and customize features of the
WAP5605.
Click this to end the Web Configurator session.
Chapter 3 Easy Mode
25