Wireless Lan Advanced Screen - ZyXEL Communications WAP5605 User Manual

Table 31 Network > Wireless LAN > MAC Filter
LABEL
Add a station
Mac Address
MAC Filter Summary
Delete
MAC Address
Apply
Cancel

9.7 Wireless LAN Advanced Screen

Use this screen to allow wireless advanced features, such as the output power, RTS/CTS Threshold
and high-throughput physical mode settings.
Click Network > Wireless LAN > Advanced. The screen appears as shown.
Figure 48 Network > Wireless LAN > Advanced
The following table describes the labels in this screen.
Table 32 Network > Wireless LAN > Advanced
LABEL
RTS/CTS
Threshold
Fragmentation
Threshold
WAP5605 User's Guide
DESCRIPTION
Enter the MAC addresses of the wireless station that are allowed or denied access to the
WAP5605 in these address fields. Enter the MAC addresses in a valid MAC address format, that
is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc.
Click the delete icon to remove the MAC address from the list.
This is the MAC address of the wireless station that are allowed or denied access to the
WAP5605.
Click Apply to save your changes back to the WAP5605.
Click Cancel to reload the previous configuration for this screen.
DESCRIPTION
Data with its frame size larger than this value will perform the RTS (Request To Send)/CTS
(Clear To Send) handshake.
Enter a value between 256 and 2346.
The threshold (number of bytes) for the fragmentation boundary for directed messages. It is
the maximum data fragment size that can be sent. Enter an even number between 256 and
2346.
Chapter 9 Wireless LAN
83